| CERTIFIED WELD PROCEDURES |
SMAW
| Weld Procedure #WP-1-1-1S | Material Type A36 to A36 |
| Electrode size 1/8 - Lincoln Jet Weld LH-70 | |
| Amps 100 to 125 | |
| Vertical Up | |
| Preheat - Removed Moisture | |
| Stringer Beeds 7 passes each side total 14 passes | |
| Weld Procedure #WP-1-1-2S | Material Type A36 to A572 |
| Electrode 1/8 - Lincoln LH-70 | |
| Amps 108 to 125 | |
| Vertical Up | |
| Preheat - Removed Moisture | |
| Stringer Beeds 6 passes each side total 12 passes | |
| Weld Procedure #WP-1-11-3S | Material Type A36 to A514 |
| Electrode size 1/8 - Lincoln LH-70 | |
| Amps 100 to 125 | |
| Vertical Up | |
| Preheat - Removed Moisture | |
| Stringer Beeds 6 passes each side total 12 passes | |
| Weld Procedure #WP-11-11-7S | Material Type A514 to A514 |
| Electrode size 1/8 Atom Arc 11018 | |
| Amps 108 to 120 | |
| Vertical Up | |
| Preheat - Removed Moisture | |
| Stringer Beeds 8 passes each side total 16 passes | |
| Interpass Temp. Not Over 280 | |
| 1/8 Root opening all SMAW plates |
FCAW
| Weld Procedure #WP-1-1-4F | Material Type A36 to A36 |
| Electrode size 1/16 - Outer Shield 71M | |
| Volts - 24.5 | |
| Wire Speed - 225 I.P.M. | |
| Gas Flow - 25 C.F.H. | |
| Preheat - Removed Moisture | |
| Vertical Up | |
| Stringer Beeds - 4 passes each side total 8 passes |
| Weld Procedure #WP-1-1-5F | Material Type A36 to A572 |
| Electrode size 1/16 - Outer Shield 71M | |
| Volts - 24.5 | |
| Wire Speed - 225 I.P.M. | |
| Gas Flow - 25 C.F.H. | |
| Preheat - Removed Moisture | |
| Vertical Up | |
| Stringer Beeds - 4 passes each side total 8 passes |
| Weld Procedure #WP-1-11-6F | Material Type A36 to A514 |
| Electrode size 1/16 - Outer Shield 71M | |
| Volts - 24.5 | |
| Wire Speed - 225 I.P.M. | |
| Gas Flow - 25 C.F.H. | |
| Preheat - Removed Moisture | |
| Vertical Up | |
| Stringer Beeds - 4 passes each side total 8 passes |
| Weld Procedure #WP-11-11-8F | Material Type A514 to A514 |
| Electrode size 1/16 Dual Shield II 110 | |
| Volts - 25 | |
| Wire Speed - 127 I.P.M. | |
| Gas Flow - 25 C.F.H. | |
| Preheat - Removed Moisture | |
| Vertical Up | |
| Stringer Beeds - 6 passes each side total 12 passes | |
| Interpass Temp. Not Over 280 | |
| 1/16 Root opening on all FCAW plates |
| NOTICE: |
| WELDER PERFORMANCE
QUALIFICATION TEST RECORDS AVAILABLE ON REQUEST |
| GO BACK TO BRAKE & CLUTCH BAND PAGE |
 |
|
||
| Wheeling Brake
Block Mfg. Co. Wheeling Brake Band & Friction Mfg. 56100 Berkley Avenue • Bridgeport, Ohio 43912 (740) 635-3310 • Fax: (740) 635-0034 www.wheelingbrake.com |
|||
|
EMAIL: sales@wheelingbrake.com • techsupport@wheelingbrake.com | |
|
